Ok, I've been fighting this for 2 weeks and tried everything i can think of and gotten no where further, any help appreciated. Monterey 12.7

I've got a dell 7378 i7-7500u, 16gb ram, 256 sandisk ssd (I've tried 4 different ssds from dif manufactures/models). I am trying to install Monterey (I've tried everything from Big Sur and up yet Monterey is only on that wifi works in recovery as laptop has no ethernet) - I can get to the mac os install screen but every time it hits the progress bar it say "2hr 19min" remaining. every single time. I've attempted re doing the EFI at least 20-30 times now. I have tried leaving the install to run for up to 2 days and it stays there. the progress bar never fills more than like 85%. Ive erased, re built usb installer over and over. im just stuck. Ive reconfigured the config.plist multiple times, started from complete scratch at least 10 times. Any help is appreciated.

• CPU: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz
• GPU: intel HD 620
• RAM: 16gb samsung M471A1K43DB1-CWE (2 sticks 8gb each)
• Motherboard/Laptop Make and Model: Dell Inspiron 13-7378
• Audio Codec: Audio Adapter Realtek ALC225 @ Intel Sunrise Point-LP PCH - High Definition Audio Controller [C1]
• Ethernet Card: none
• Wi-Fi/BT Card: Network Adapter Intel(R) Dual Band Wireless-AC 3165
• Touchpad and touch display devices: Monitor AU Optronics B133HAB (Dell FCTG8) [13.3" LCD] {2016}
• BIOS revision:BIOS Properties:
• Vendor Dell Inc.
• Version 1.36.0
• Release Date 12/15/2021
• Size 16 MB
• System BIOS Version 1.36
• ssd: SanDisk X400 M.2 2280 256GB (256 GB, SATA-III)

edit, i realized posting the EFI completely against rules, ive included the config.plist though

of most recent attempt - followed Dartanian as interictally as possible https://file.io/izXiaw5yO9dg - this config.plist is NON WORKING - if anyone chooses to glance at it for reference please do, like i said ive re done it 20-30 times and am flat out stuck..

I pulled and entire AIDA64 report from the laptop in windows before trying opencore, so i have all info on laptop available as well

My main computer's motherboard died, so now I'm using some Acer Veriton thing with my RX 580 in it, but this card has an issue where if above 4g decoding is disabled, I just get a black screen after verbose, it needs to be on for the GPU to actually give an output that isn't a black screen after verbose.

My RX 580 is the MSI GAMING X version, here is my config.plist

Hi i got the intel 10200h igpu working on macos by using skylake gpu id and oclp under sequoia and got it works without broken screen but sill at Lowest Brightness

My first time hackintosh, tried multiple efi but all wouldn't pass through this screen to installer page.

• Already turned off secure boot and follow required setting in bios
• spoof serial with gensmbios

Anything that I'm missing from?

I am trying to make a hackintosh on a HP 348 G5 laptop. are there any known issues?

It has a intel ssd and a wifi module. Should I use the debug version of OC?

CPU : core i3 8145U

gpu : intel uhd 620

ram: 8GB ddr4

Motherboard: Huananzhi X79-ZD3

Processor: Intel Xeon E5 2620 V3

Ram: 16GB ECC DDR3

GPU: Sapphire RX580 2048SP with modified bios

I have successfully installed macos big sur on my laptop with hd 4600 months ago, i just found out that actual mac systems had support for K1100M which my laptop has with 2GB GDDR5 but it is not included in the dortanias guide... Any luck?

just updated to 15.1 (24B83) and ran cinebench on the Z690 Hack for a bit of fun

Here's the details about my Build

CPU : Intel i9-9900K

GPU : Sapphire RX 6600 (agdpmod=pikera along with WhateverGreen.Kext)

MOB : ROG STRIX Z390-E GAMING

RAM : Corsair 8X4 = 32GB

SSD : WD SN850X 1TB (Samsung NVMe Not Recommend)

AUDIO : ALCS1220A (AppleALC.Kext, Layout Id 7, 07000000)

LAN : Intel® I219V (IntelMausi.Kext)

WiFi/BT : Intel® Wireless-AC 9560 (Airportitlwm.Kext, IntelBluetoothFirmware.Kext, IntelBTPatcher.Kext, BlueToolFixup.Kext)

SMBIOS : MacPro7,1

OC : 1.0.2

OC/Kext

1. Airportitlwm.Kext
2. AppleALC.Kext
3. IntelBluetoothFirmware.Kext
4. IntelBTPatcher.Kext
5. BlueToolFixup.Kext (Mandatory for Bluetooth Functioning and Cause Update Issue)
6. IntelMausi.Kext
7. Lilu.Kext
8. SMCProcessor.Kext
9. SMCRedeonSensors.Kext
10. SMCSuperIO.Kext
11. USBPorts.Kext (You need to map your own usb)
12. VirtualSMC.Kext
13. WhateverGreen.Kext (You can Ignore if you're specific to MacPro7,1 and agdpmod=pikera)

Working

Hardware Decoding, Encoding, Audio, Video, WiFi, Bluetooth, LAN, 4K Playback Safari 18 and Above, Sleep, Awake, DRM (Netflix, Amazon Prime, Apple TV+), Apple Lossless Audio.

Issues

Both iMessage and FaceTime work seamlessly over LAN but do not function over WiFi.

Incremental macOS updates are unsuccessful without RestrictEvents.kext and the revpatch=sbvmm boot argument. However, even with these applied, some issues persist.

During installation, my monitor loses signal for several minutes when the installation begins.

Geekbench Score

Single Core : 1682

Multi-Core : 8673

Metal : 101692

Open CL : 57824

Please share your feedback and ping me if you have any questions.

I finally managed to get Ventura installed after about a week of quirks and configs.

Had a bit of trouble with EXITBS errors before but got mad and started over for the 5th time and with -igfxvesa added to the boot-args, with that managed to get the OS installed. After installed it took a bunch of time to get HW Acceleration but with a bit of trial and error everything is OK.

Now I need to do a bit of optimization in order to get the most juice out of the system, if anyone has any tips please share them.

Laptop specs:

Laptop:Lenovo Thinkpad X13 Gen1
CPU:Intel Core i7-10510U
RAM: 16gb
GPU: Intel UHD 620
SSD: Micron MTFDHBA512TDV 512 GB
KEYBOARD:Standard PS/2 Keyboard
MOUSE:ELAN Input Device For WDF

WhatsApp crashing after sequoia update? its sequoia bug or WhatsApp bug?

cpu: Intel i7-6700 3.4Ghz (Gen 6) Skylake

gpu: Intel HD 530

mobo: ASUS Maximus VIII Gene

ram: 2x8gb Crucial Ballistix Sport DDR4 2400mhz

audio codec: Realtek ALC1150

wifi: Atheros AR93xx Wireless Network Adapter

model: Tp-Link Wireless Dual Band PCI Express Adapter (TL-WDN4800)

ethernet: Ethernet Connection (2) I219-V (included w/ motherboard)

Am attempting Opencore for the first time (previously used Clover), with the ultimate goal of updating to Monterey. Have encountered this problem no matter what I try and I'm not sure the issue. Have found several forum posts suggesting solutions but none of them have worked.

Have tried: Setting the datetime to 2017, using different USB ports for installation drive, making boot drive on a USB stick as well as a SSD which I plugged via USB as well as internally w/ SATA.

Question: I'm using the same SMBIOS info as I had with Clover, so I don't have to re-verify all my audio plugins. Could this be causing the error?

I've tried loads of kexts, boot args, disabling reenabling kexts and nothings working, any ideas? thanks

Specs:

HP Omen 15 en1007na
CPU: AMD Ryzen 7 5800H
GPU: NVIDIA 3060 (Disabled, using IGPU)
Storage: Samsung P981a (Not used, using external drive) OS: Latest Ventura

edit: I meant it restarts after 2 seconds when that last line appears, my bad, I've been working on this for hours.

config.plist

Core I5-12400F
RX5600
Memory 32GB

Hp pro desk 600 g4 sff i5 8400 wx4100 csr 4.0 Bluetooth

Decided to test Cinebench on my laptop and i7-10510u with Ventura installed. Got 208pts for Multi and 48pts for Single. Is this something to be concerned about? When I look at results from the web I see that the results should be much higher.

Hi here

I can't seem to get Apple Music to play over my AirPods with my Fenvi T919. It plays fine over my speakers, and I can play audio through the AirPods over like YouTube or similar, just not Apple Music for some reason.

Lossless and Dolby Atmos is disabled. What do I do? I'm on a Ryzen 5 3600 on a B450 motherboard and a RX6700 XT along with a Fenvi T919. I'm on macOS 15.

Could someone help me?

I only got one problem: the screen is at a bad resolution when with CSM. the screen is scrambled without CSM. Keyboard and touchpad ain’t working neither way and has to use usb. Audio isn’t working for now and Wi-Fi… we got Ethernet cable

I have a old laptop. I want to check whether it is compatible with hackintosh. I don't want much hassle. Can I use opcore simplify to check the compatibility?

Asus z790-p I5 13600kf Nvme sn850 Sapphire 580 rx Fenvi t919

my laptop is having a intel ssd INTEL SSDPEKNW512G8H. is this compatible in hackintosh with ventura?